Recalling Memories; B6J Microphone; To Turn On The Alpha-Numeric; Memory Name Display - Yaesu FT-2600M Operating Manual

Memory System Operation
R M
ECALLING EMORIES
From the VFO mode, momentarily press the [D/MR] key once to activate the "MR" (Memory
Recall) mode.
When more than one memory has been stored, use the Main Dial knob to select a memory
for operation. Alternatively, microphone's [UP] and [DWN] buttons may be used to step
or scan through the available memories. When using the microphone's buttons, press and
immediately release the button to move one step up or down; press and hold the [UP] or
[DWN] button for one second to begin memory scanning.
While you are operating in the MR mode, the "M " notation will appear at the right side of
the display.
à
M R MH-36 M
EMORY ECALL FROM ICROPHONE
B6J
While operating in the VFO, H Channel (see below), or Memory Recall mode, the
OME
keypad of the MH-36 may be used for direct recall of memory channels.
B6J
To do this, press the Channel Number you wish to recall, then press the [*] key. For ex-
ample, to recall Memory Channel 5, press [5] [*]. To recall Channel number 118, press
[1] [1] [8] [*].
T T A -N M N D
O URN ON THE LPHA UMERIC EMORY AME ISPLAY
If you are in the "MR" mode, press the [A/N] key to replace the frequency display with the
Alpha-Numeric Label.
FT-2600M O M 33
PERATING ANUAL