Advertisement

Quick Links

CHART 2. FUNCTIONAL REFERENCE
Desired Function
CALL Ch (Mem 0) Recali
Dial Step Select
Memory Hide/ Restare
Memory Recali
Memory Storage
Priority Ch. Monitor
Repeater Odd Split
Program Std. Rptr Offset
Activate Std. Rptr Split
Reverse tx/rx freqs.
Scanning
Step Up/Down 1 MHz Steps
Unlock (or Lock) Keys
Set CTCSS Tone Freq.*
ToKKle CTCSS ENC/DEC*
Keystroke(s)
Press [CALL]
[FMSTEP]
[F] + [M], Select Mem Ch., [F]+[M]
[D/MR], Rotate Knob
[D/MR] (to Dial Mode), Select Freq.,
[F] + [M], Select Mem Ch no., then [D/MR]
Op on Mem, Priority Mon Ch 1: [F] + [PRI]
Op on Dial, any Priority Mem: Recali
Mem to Monitor, set Squelch, [D/MR],
[F] + [PRI]. Press [D/MR] to cancel.
Sìore rx freq. in Mem 0 - 6., lune Dial
to tx freq., Stare in same Mem while
holding PTT (when pressing [D/MR]).
("•*•/-" display ed when recalled).
Turn power off. Hold [RPT] while turning
power back on. Tune display to offset,
and press [RPT] to return to normal.
[RPT] Once = -, Twice = +
[REV]
Set Squelch, [D/MR] to select Dial/Mem,
Press and hold [UP] or [DOWN] i-sec.
[F]+[UP]/[DOWN] or Tuning Knob
[F] + [LOCK]
[FHTSET], Selector Knob, [TONE]
[TONE]
Only if FTS-12 installed; otherwise inactive.
FT-2311R
1.2GHz FM TRANSCEIVER
YAISU
V
YAESU MUSEN CO., LTD.
C.P.O. BOX 15OO
TOKYO, JAPAN
FT-2311R OPERATOR'S QUICK REFERENCE CHARTS
CHART 1. KEY FUNCTIONS
f
LOCK
M
y2S3
T SET
iTEP
«»
Normal Function
Shift other keys to
alternate functions
Activate Repeater Split
(plus - minus - none)
Select Dial or Memory mode
Jump to CALL Channel (0)
Toggle Subaudible Tone*
ENC - ENC/DEC - off
Reverse Repeater Split
(only if REPT active)
Dial Mode: Down 1 Ch Step
Mem Mode: Down 1 Ch no.
Dial Mode: Up 1 Ch Step
Mem Mode: Up 1 Ch no.
Alternate Function (after
Di
)
Cancel alternate key functions
Lock (or unlock) ali keys
. (exc this one and F)
Memorize displayed data
Toggle Priority Channel Monitoring
Check/Set Subaudible Tone freq.
Toggle Channel Steps
(12.5 or 25kHz)
Down 1 MHz
(no action in Mem Mode)
Up 1 MHz
(no action in Mem Mode)
Only if FTS-12 installed; otherwise inactive.

Advertisement

Table of Contents
loading

Table of Contents