Sfp Module Patch Cable - Cisco CGS 2520 Hardware Installation Manual

Ports
Table 1-2
Type of SFP Module
Rugged and Industrial SFPs
–40 to 140°F (–40 to 60°C)
Commercial SFPs
32 to 113°F (0 to 45°C)
Extended temperature SFPs
23 to 140°F (–5 to 60°C)
For information about SFP modules, see your SFP module documentation and the
Removing SFP Modules" section on page
section on page B-4

SFP Module Patch Cable

The switch uses an SFP module patch cable, a 0.5-meter, copper, passive cable with SFP module
connectors at each end (see
configuration.
Figure 1-3
For information about using the SFP module patch cable, see the
Module Patch Cable" section on page
Cisco CGS 2520 Hardware Installation Guide
1-6
Maximum Operating Temperature
Figure 1-3). The patch cable connects two switches in a cascaded
SFP Module Patch Cable
2-21.
Model
• GLC-SX-MM-RGD
• GLC-LX-SM-RGD
• GLC-FE-100LX-RGD
GLC-FE-100FX-RGD
•
GLC-ZX-SM-RGD
•
GLC-BX-D with digital optical monitoring
•
(DOM) support
GLC-BX-U with DOM support
•
GLC-FE-100LX
•
GLC-FE-100BX-D
•
GLC-FE-100BX-U
•
GLC-FE-100FX
•
GLC-FE-100EX
•
GLC-FE-100ZX
•
CWDM SFP with DOM support
•
SFP-GE-L with DOM support
•
SFP-GE-S with DOM support
•
SFP-GE-Z with DOM support
•
GLC-EX-SMD with DOM support
•
2-19. For cable specifications, see the
"Inserting and Removing the SFP
Chapter 1 Product Overview
"Installing and
"SFP Module Cables"
OL-31444-01