Regular Memory Operation; Erasing Memory Channel Data; Memory Tune Operation - Yaesu FT-410 Operation Manual

Erasing Memory Channel Data

1. Press the [ V/M ] button, if necessary, to enter the
Memory mode.
2. Rotate the [ MAIN DIAL ] knob to select the memory
channel that you would like to erase.
3. Press and hold the [M-CLR] button to erase the
contents of the selected memory channel. The
display will revert to memory channel 1.

Memory Tune Operation

You may freely tune off of any memory channel in the "Memory Tune" mode, this is similar to VFO operation.
So long as you do not over-write the contents of the current memory, Memory Tune operation will not alter
the contents of the memory channel.
1. Press the [ V/M ] button, if necessary, to enter the
Memory mode.
2. Rotate the [ MAIN DIAL ] knob. You will now observe
that the memory channel's frequency is changing.
3. Press and hold the [ V/M ] button for one second.
During Memory Tune operation, you may change
operating modes, and engage and offset the
Clarifier, if desired.
4. Press the [ V/M ] button momentarily to return to the
originally-memorized frequency of the current memory channel. One more press of the [ V/M ] button will
return you to VFO operation.
FT-410 O
peraTiOn
r m
eGulAr
M
anual
M
eMOry
o
emory perAtioN
[MENU]
O
peraTiOn
button
[M-CLR]
M-012
14.195.000
button
button
[V/M]
knob
[MAIN DIAL]
M-012
14.195.000
button
[V/M]
knob
[MAIN DIAL]
Page 25