Gxv3501/Gxv3504 Ptz - Grandstream Networks GXV3501 User Manual

User Name / Password – The user name and password required to log into your FTP server
Path – The directory in the FTP server where recorded video will be uploaded.
Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is
properly configured.
GXV3501/GXV3504 PTZ Page
This page configures the PTZ settings. Select the PTZ
protocol that your connected equipment supports by
clicking on the radio in front of the protocol. Next,
select the Baudrate from the drop down menu.
PTZ Configuration Items
PTZ Protocol – The GXV3501/GXV3504 supports
both Pelco-D and Pelco-P. Select the protocol your PTZ
equipment supports.
PTZ Baudrate – The Baud rate is the number of distinct symbol changes (signaling events) made to
the transmission medium per second in a digitally modulated signal or a line code.
Connect a PTZ device to the GXV3501/GXV3504
1. Connect the PTZ device to GXV3501/GXV3504 by following the connection diagram shown
below
2. Click Advanced Settings > PTZ; in PTZ page, configure the PTZ Protocol and Baudrate
according to your connected PTZ device.
3. Click Save and reboot the device to apply all changes.
4. Use those PTZ buttons on the homepage to tilt, pan the GXV3501/GXV3504 and also adjust
the speed.
NOTE: Press and hold the corresponding control button to adjust the pan, tilt, zoom and speed.
Firmware 1.0.1.18
Grandstream Networks, Inc. 08/2009
GXV3501/GXV3504 Digital Video Server
Page 22 of 31