Installation; Minimum Recommended Requirement; Connect Your Gxv3501/Gxv3504 - Grandstream Networks GXV3501 User Manual

Installation Guide
Minimum Recommended System Requirement
•
Windows 2000 Server Professional, Windows XP, Windows Vista.
•
CPU: Intel Pentium 4 or higher, 2 GHz.
•
RAM: 1 GB (4 GB recommended for larger systems).
•
Support for DirectX 8.0 and above.
.

Connect your GXV3501/GXV3504

Using the Power adapter as power supply
•
Connect the video output of an analog camera to the VIN port on the GXV3501/3504 using a
BNC (75Ω) cable. If the analog camera has audio output, connect the audio output to the AIN
port on the GXV3504 (GXV3501 does not support audio input).
•
Connect an RJ 45 cable to the NETWORK port of the GXV3501/3504
•
Connect the other end of the RJ 45 cable to your network or PC directly
•
Connect the power supply to the DC 12V power jack on the back of the GXV3501/3504
•
Connect the other end of the power supply to a wall outlet. The POWER indicator will light
green
•
The NETWORK indicator will light green within 5 seconds to indicate that a connection to
the internet has been established.
•
The GXV3501/3504 is ready when the READY indicator lights up green.
•
The VIDEO IN indicator will light up when the video inputs are connected to a video source.
Using PoE as power supply:
•
Connect the video output of an analog camera to the VIN port on the GXV3501/3504 using
BNC (75Ω) cable. If the analog camera has an audio output, you should connect it to the AIN
port on GXV3504 (GXV3501 does not support audio input).
•
Connect a RJ 45 cable to the NETWORK port of GXV3501/3504
•
Connect the other end of the RJ 45 cable to a PoE switch. The POWER indicator will light
solid green
•
The NETWORK indicator will light green within 5 seconds to indicate that a connection to
the internet has been established.
•
The GXV3501/3504 is ready when the READY indicator is solid green
•
The VIDEO IN indicator will light up when the video inputs are connected to a video source.
NOTE: If you are going to connect the device to a hub/switch/router, please use a straight-through
cable. A cross over cable should be used if you are going to connect the device directly to a PC.
Firmware 1.0.1.18
Grandstream Networks, Inc. 08/2009
GXV3501/GXV3504 Digital Video Server
Page 10 of 31