Table of Contents
Advertisement
Bluetooth Setup
[SRC] [VOL]
[
] / [
[ ] [ ]
Bluetooth Setup
You can select following Bluetooth Setup items.
1
Enter Bluetooth mode
Press the [VOL] knob.
"BT MODE" is displayed.
2
Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
"FUNCTION" is displayed.
3
Select the function item
Turn the [VOL] knob and it when the desired
item is displayed.
>
Select "SETTINGS"
>
"SETTINGS"
"DETAILED SET"
Function item
Selectable setting/item
"PHONE SELECT"
Selects a cell-phone connection. Refer to
<Selecting the Bluetooth Device You Wish to
Connect> (page 23).
"SMS DOWNLOAD"
Download a short message. Refer to
<Downloading the SMS> (page 23).
"SMS INBOX"
Display the received short message. Refer to
<SMS (Short Message Service)> (page 24).
"VOICE TAG"
Registers voice for voice recognition and
voice to select the Phone number category in
Phone book. Refer to <Adding a Voice Dialing
Command> (page 24) and <Setting a Voice
Command for Category> (page 25).
"DETAILED SET"
Move to detailed item.
"DEVICE REGIST" Registers a Bluetooth device (pairing).
Refer to <Registering Bluetooth device>
"S-DVC SELECT"
(page 21).
"DEVICE DELETE" Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth Device>
(page 21).
"PIN CODE EDIT" Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page 22).
20
|
KDC-U546BT
]
Function item or select
> >
Function item.
"AUTO ANSWER" This function automatically answers (responds
to) a call after lapse of the preset time interval
for automatic answer.
OFF: Does not answer the phone call
automatically.
0: Automatically answers the phone call at once.
1 – 8 –99: Automatically answers the phone
"BT SP SELECT"
You can specify the audio output speakers.
Select the speaker which is further from the
microphone in order to prevent howling or
echoes.
SP FRONT: Outputs audio from the front-left and
SP ALL: Outputs audio from the all speakers.
"CALL BEEP"
You can output a beep from the speaker when a
call comes in.
ON: Beep is heard.
OFF: Beep is canceled
"BT F/W UPDATE" Display the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 22).
"MIC GAIN"
Adjust the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to "+" increases the voice volume.
–3 – 0 – +3
"NR LEVEL"
Reduce the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to "+" increases the
noise reduction.
–3 – 0 – +3
"EC LEVEL"
Adjusts the level of echo cancellation. Setting to
"+" increases the echo cancel reduction.
–2 – 0 – +2
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [
] button for at least 1 second.
call after lapse of 1 – 99 seconds.
front-right speakers.
Hide quick links:
Advertisement
Table of Contents
