Introduction; Specifications - Jet J-7015 Operating Instructions And Parts Manual

Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.

Introduction

The JET Model J-7015 Horizontal Cut-off Bandsaw is designed for high production cut-off work. Four
cutting speeds and a hydraulic feed control allow the efficient cutting of virtually any material.
The Model J-7015 Horizontal Cut-off Bandsaw is equipped with a coolant system that can greatly extend
blade life and speed the cutting of a variety of materials that are best cut with cutting fluids and coolants.

Specifications

Model Number .......................................................................................................................... J-7015
Stock Number .......................................................................................................................... 414450
Capacity:
Rectangular Stock at 90° (in.) ..................................................................................................9 x 13
Rectangular Stock at 45° (in.) .................................................................................................. 9 x 8
Round Stock at 90° (in.).................................................................................................................. 9
Round Stock at 45° (in.).................................................................................................................. 9
Flat Stock (in.) ........................................................................................................................8 x 10
Speeds (FPM) ............................................................................................................82, 132, 170, 235
Motor ......................................TEFC, 1-1/2 Horsepower, Capacitor Start, 1725 RPM, 1 Phase, 115/230V
Blade Size (in.) ........................................................................................................... 1 x 0.035 x 114.5
Blade Guides............................................................. Tungsten carbide tip & ball bearing, eccentric shaft
Material ....................................................................................................... Tungsten carbide inserts
Sides.................................................................................................... Eccentric shaft, ball bearings
Blade Wheel (in.) ............................................................................................ 11-5/8 diameter, cast iron
Dimensions (LxWxH)(in.).................................................................... 62.5 x 22.4 x 48.4 (cutoff position)
Net Weight, approx. (lbs.) ................................................................................................................ 551
Vise ................................................................................................ Rapid acting, screw tightening vise
Coolant Pump ................................................................................. 1/8 Horsepower, 1Phase, 115/230V
6