Glass Cleaning - Dimplex DF3003 Owner's Manual

Maintenance
To replace the bottom light
bulbs:
1. Lift up the front edge of the
log until it clears the front
tabs. Pull out until the rear
tab clears the back ledge,
then lift out (Figure 7).
2. Examine the bulbs to de-
termine which bulbs require
replacement.
3. Hold the socket while un-
screwing the bulb.
4. Hold the socket while screw-
ing in the new bulb.
5. Replace the log ember bed
by placing the back lip of the
log ember bed under the mir-
ror then push the front of the
log ember bed down into the
recess (Figure 7).
Upper Light Bulb Requirements
Quantity of two clear chandelier
Figure 6
A
14
Removing
Glass
or candelabra bulbs with an E-12
(small) socket base, 15 Watt rat-
ing.
To replace the top light bulbs:
1. Locate the two upper bulbs
inside the firebox at the top
(Figure 8).
2. Examine the bulbs to de-
termine which bulbs require
replacement.
3. Hold the socket while un-
screwing the bulb.
4. Hold the socket while screw-
ing in the new bulb.

Glass Cleaning

The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the clear door may
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
Holding
Glass
B
Retaining
Clip
www.dimplex.com