Siemens S7-200 System Manual page 49

Using the Keypad Designer to Create a Custom Faceplate for your Text Display (TD) Device
Figure 3-4
If you open a file with different target (for example, you are working on a TD 200C file, and
you open a TD 100C file), the panel workspace resizes for the new target. Since the
application is sized based on the panel workspace, you may have to resize and re-position
your application framework.
Table 3-1 describes the files that are used by the Keypad Designer.
You can change the language of the Keypad Designer by selecting the Tools > Options
menu command. You select the language from the Options dialog shown below.
Figure 3-5
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
TD400C Keypad Template
Options Dialog
3.3 Starting the Keypad Designer
49