Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 91.
Removing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 59.
2 Remove the drive panel (see "Removing the Drive Panel" on page 81).
3 Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you are installing a PCI Express x16 card, this card may cover the floppy-drive connectors. Remove this
card before connecting the floppy-drive cables.
4 Slide the drive latch release toward the bottom of the computer and, without releasing the drive latch
release, slide the floppy drive out through the front of the computer.
90
Removing and Installing Parts
power cable
data cable