Setting Your Computer To Raid-Enabled Mode; Press The Left- And Right-Arrow Keys To Highlight Save/Exit, And Press <Enter> To Exit System Setup And Resume The Boot Process - Dell DIMENSION E510 DCSM Owner's Manual

Setting Your Computer to RAID-Enabled Mode

1 Enter system setup (see "System Setup" on page 109).
2 Press the up- and down-arrow keys to highlight Drives, and press <Enter>.
3 Press the up- and down-arrow keys to highlight SATA Operation, and press <Enter>.
4 Press the left- and right-arrow keys to highlight RAID On, press <Enter>, and then press <Esc>.
NOTE:
For more information about RAID options, see "System Setup Options" on page 110.
Press the left- and right-arrow keys to highlight Save/Exit, and press <Enter> to exit system setup
and resume the boot process.
30
Setting Up and Using Your Computer