Dell DIMENSION E510 DCSM Owner's Manual page 111

Memory Info
PCI Info
Date/Time
Boot Sequence
(Diskette drive default)
Drives
Diskette Drive
(Internal default)
Drives 0 through 3
(On default)
SATA Operation
(RAID Autodetect/ATA
default)
Displays the amount of Installed Memory, Memory Speed, Memory
Channel Mode, and a description of the Memory Technology. This option
also displays a table that describes the memory size, whether the memory
module is ECC capable, single or dual rank, type, and organization.
Displays the contents of each PCI slot.
Controls the system's internal calendar and clock.
Determines the order in which the system searches for boot devices during
system startup.
NOTE:
If you insert a boot device and restart the computer, this option appears
in the system setup menu. To boot from a USB memory device, select the USB
device and move it so it becomes the first device in the list.
Enables and disables the floppy drives and sets read permission for the
internal floppy drive.
• Off — disables all floppy drives
• USB — enables the USB floppy drive
• Internal — enables the internal floppy drive
• Read Only — enables the internal drive controller and allows the internal
floppy drive read-only permission
NOTE:
Operating systems with USB support will recognize USB floppy drives
regardless of this setting.
Enables or disables an ATA or SATA device (such as hard-drive, CD drive, or
DVD drive). On enables the interface so that the device can be used.
Displays the Controller type (ATA or SATA), Port number the drive is
using, Drive ID number, Capacity, and whether the drive is controlled by
the BIOS.
Identifies and defines the SATA controller settings for RAID. You can set
the SATA controller to RAID Autodetect/ATA or RAID On.
111
Appendix