Fast-Forward, Rewind; Search; Blank Search - JVC GY-DV5100 Instructions Manual

8. PLAYBACK MODE

8-2 Fast-Forward, Rewind

■ Press the FF button in the stop mode to fast forward the
tape. Press the REW button in the stop mode to rewind the
tape.
■ Press the STOP button to stop fast forwarding or rewinding.

8-3 Search

■ Press the FF button in the play mode or still mode to search
the tape in the forward direction. Playback takes place while
fast forwarding.
Pressing the REW button executes search of the tape in the
reverse direction. Playback takes place while rewinding.
(Each press on the button switches the speed to ×5, ×10,
and ×20.)

8-4 Blank Search

BLANK SEARCH button
BLANK SEARCH REW
Status screen
BLANK SEARCH
BSRH 01/02/03 AM––:––:––
Blank search operation indicator
E-62
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
STOP FF PLAY STILL
12.2V
OPEN
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
MEMO:
● When the tape approaches the end during fast forwarding
or rewinding, the tape speed decelerates to protect the
tape.
● The time required for fast forwarding and rewinding may
become longer when used in a cold environment. This
is not a malfunction.
■ Press the PLAY button to resume normal playback.
■ Press the STOP button to stop.
MEMO:
● To output sound during the search, set the A.OUT AT
SEARCH item on the AUDIO menu screen to ON.
● Block noise may appear in the picture or the image may
freeze during the search.
This function can be used to locate blank portions (unrecorded
portions) on the tape, such as the end of a recording.
1.
Engage the stop or STILL mode.
2.
Press the BLANK SEARCH button.
● Blank search starts.
When a blank part (unrecorded part) on the tape is
detected, the unit enters the STILL status in the VTR mode
and the Standby status in the CAM mode.
■ To stop blank search, press the STOP button.
MEMO:
● "BLANK SEARCH" is indicated on the LCD monitor and
in the viewfinder during blank search. (When the Status
screen is shown.)
● To prevent that images will be missing, overwrite from
about 3 seconds before the point where the previous
recording ends.
BLANK SEARCH REW STOP FF PLAY STILL
FF button
REW button