Wall Console Installation - Genie Excelerator 3531835447 User Manual

Genie garage door opener user manual
Hide thumbs Also See for Excelerator 3531835447:
Table of Contents

Advertisement

WF_LL C©BSS©L
WARNING
Verify there is no power to the Opener before installing Wall
Console Wires.
NOTE
More than one lighted Wall Control per Opener will cause
a malfunction.
A
Wall Console (Figure 31):
Has a Security Vacation Lock Switch which disables
all controls.
LED Indicator shows whether
system is powered, locked,
or unlocked.
Makes Console easy to find in dark.
Controls door Opener from inside garage.
Independent
Light Control allows convenient
manual
control of Opener Lighting
System.
B
Find a convenient
mounting
location:
Within direct sight of garage door.
At least 5' above floor (to prevent small children from
operating
garage door).
Away from any moving garage door or Opener parts (you
should not be able to reach door while standing
at
Wall Console).
C
Ensure Vacation Lock Switch is in UNLOCKED position.
D
Wire Wall Console to Opener (Figure 32):
On Power Head, connect
Striped Wire to Terminal #1 and
White Wire to Terminal #2.
On back of Wall Console, connect Striped
Wire to
terminal "B" and White Wire to Terminal "W'[
E
Attach Wall Console onto wall at location
found above with 2
(#6 x 11/4") Pan Head Screws.
F
Remove protective
backing from Entrapment
Warning Label,
and attach it to wall near Wall Console.
CAUTION
e
Use of any wall consoles other than the type included
will prevent the light from working properly and could
cause the door to operate on its own.
Cut or pinched Wires can cause the Wall Console to stop
working. When using the Insulated Staples, be sure to
only tap them in as far as needed to hold the
Wire snugly.
Security
Vacation
Lock Switch
Independent
Light Control
1
[
I
Garage Door
J
Control
©
Wall Console
@
Figure 31 Wall Console
Allow
slack
®®@
Terminal
Attachment
at Power Head
White Wire
to
Terminal 2
Striped Wire
to
Terminal 1
Terminal
Attachment
at Wall Console
White Wire
to
Terminal "W"
Striped Wire
to
Terminal "B"
®
Figure 32 Install Wall Console with
Entrapment
Warning Label

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents