Da-Lite DESIGNER MANUAL SCREEN Operating Instructions

MAINTENANCE
PROJECTION SCREEN MAINTENANCE
Protect your screen by keeping it rolled in its
case when not in use. Always examine both
front and back of surface before rerolling into
case to make certain screen is free of dust, dirt
or other foreign matter. Use a very soft duster
brush to gently remove foreign particles.
CASE MAINTENANCE
The case of the screen has a Resistovar finish.
This finish is resistant against: water, alcohol,
marring, scratching, and nail polish remover. To
help maintain the best appearance of the case
it is recommended that the case be polished
with any reputable liquid or paste wax polish.
An oil type polish is not recommended because
it allows for the collection of dust and finger
prints. When necessary, this finish may be
wiped with a damp soft cloth using a mild soap
solution, rinsed with clear water and dried with
a soft cloth.
Printed in U.S.A.
The
76488 Rev. 7/02
Operating Instructions
Designer
Manual Screen
POWER
In
PRESENTATION PRODUCTS
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574/267-8101
800-622-3737
Fax: 574/267-7804
http:// www.da-lite.com
e-mail: info@da-lite.com
For