Generac Power Systems 941-2 Service Manual page 29

See "Exploded View of Sheet Metal" on next page. A
DIVIDER PLATE (Item 1) separates the AC generator
components from the engine. The engine Itself is
enclosed by a BASE HOUSING WRAPPER (Item 4),
a FRAME (Item 24), and a BELLY PAN (Item 23).
These components are sealed by means of rubber
SEALS (Items 3), to prevent
GENERAL
The LOWER FAN attaches to the engine shaft and is
enclosed in a LOWER FAN HOUSING (Item 19). Air
is drawn Into the enclosed area around the engine
and forced out of the LOWER FAN HOUSING.
Removal of sheet metal will be necessary for many
repairs and for replacement of most parts.
Impact Plus Generator
Section 1.7
SHEET METAL
Page 1.7-1