Kodak 3000 series User Manual page 45

Large format inkjet printers

Hide thumbs Also See for 3000 series:

Table of Contents

Setting up the Printer

Aligning the Media

1. Check the position of the left side of the media to make sure that it is at least

0.25 in. (5 mm) from the edge of the pressure roller.

IMPORTANT:

The baseline holes are a guideline. You are allowed about 0.25 in.

(5 mm) of play to the left and right of the center of the base line

holes. This play allows you to correctly align the media.

2. Lower the media hold lever, and close the

cover. The head moves automatically and

detects the media size.

The control panel displays the following

message during loading:

MEDIA INITIALIZING

After performing the media loading sequence

(about 30 seconds), the printer displays the

following message:

PLOT OK

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

If the distance between the left side of the

media and the pressure roller is less than

0.25 in. (5 mm) or the left side is not under a

pressure roller, align the right edge again.

Table of Contents

Professional 3000 series