Cleaning The Head Cleaning Wiper - Kodak 3000 series User Manual

Maintaining
the Printer

CLEANING THE HEAD CLEANING WIPER

When the head is cleaned, debris on the cleaning wiper may cause the printing to
become faint or blemished. Do the following procedure to clean the head cleaning
wiper.
1. Turn the power switch OFF, lower the hold lever, and move the head to the middle
position.
CAUTION:
Make sure that you lower the hold lever before you move the head
to prevent damage to the head and the media keeper blade.
2. Using the cleaning wiper cloth, wipe the cleaning wiper from back to front two or
three times.
1. Head cap unit
2. Cleaning wiper
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
60