Kodak 3000 series User Manual page 40

Large format inkjet printers

Hide thumbs Also See for 3000 series:

Table of Contents

Setting up the Printer

Aligning the Media

IMPORTANT:

The baseline holes are a guideline. You are allowed about 0.25 in.

(5 mm) of play to the left and right of the center of the baseline

holes. This play allows you to correctly load the media.

3. Check the position of the left side of the media to make sure that it is at least

0.25 in. (5 mm) from the edge of the pressure roller.

4. If the distance between the left side of the media and the pressure roller is less than

0.25 in. (5 mm) or the left side is not under a pressure roller, align the right edge

again.

1. Align the front edge of the media with the

leading edge of the printing plate.

2. Align the right side of the media with the

baseline holes.

basel i ne

holes

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

Table of Contents

Professional 3000 series