Setting up the Printer
Loading Roll Media
NOTE:
Handle the media by the edges, or wear protective
gloves.
1. Feed the media into the media feed gap and
between the pressure rollers and the drive roller.
Pulling Out the Media
1. From the front of the printer, pull out 1.5 ft (0.5 m) of
media.
Checking the Position of the Roll Media
5. Make sure that the power to the printer is turned on.
6. Align the right side of the media with the baseline holes.
7. Turn the scroller manually to wind the media back onto the roll so that the end of the
media extends approximately 3 in. (7.5 cm).
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
1. Pressure rollers / media hold down fins
2. Move the roll media to the right.
3. OK
4. Move the roll media to the left.
39