Viewing Images On A Tv Faster - Cuddeback NoFlash Owner's Manual

View Qual
High
View Qual
Standard
TIP - Why would you want to do all
this? If your Cuddeback has taken a
lot of images you will find that it
takes a long time to view all the
images when High Quality viewing
is selected. If you select Standard
Quality viewing you will be able to
view the images much faster. Then,
when an image of importance is dis-
played you can switch that image to
High Quality to see more details.
Viewing Quality does NOT effect
how the images are saved on the
Compact Flash Card. Images are
always saved in high resolution.
This command only effects how the
images are displayed on a TV
attached to Cuddeback.

VIEWING IMAGES ON A TV FASTER

If you use a TV to view images in EZ Mode you will
notice that it takes a few seconds to display the
image. In Advanced Mode you can speed up the TV
by displaying the image in lower quality.
Figure 68
You can set the default view quality to Standard or
High. When High is selected Images will be displayed
in high quality. It will take several seconds to display
the image on the TV. When Standard is selected
images will be displayed in lower quality, but they will
be displayed very quickly. When images are viewed
on the TV in standard quality you can switch to high
Figure 69
quality to see a more detailed image.
Setting the Default View Quality
1) Press
Yes] is displayed.
2) Press
3) Press
is displayed.
4) Press
Switching from Standard to High Quality when
Viewing an Image
If you are viewing an image on a TV attached to
Cuddeback in standard quality, you can switch the
viewing of that image to high quality.
1) Display the image on the TV as described on
page 16.
numerous times until [Utilities? C =
.
numerous times until [View Quality]
(figure 68) or
or to change the setting.
38
(figure 69)