TIP - You don't have to enter char-
acters in all 16 positions. At any
time you can finish by pressing (C).
You can cancel entering the phone
number at any point before Saved!
is displayed by pressing (S)
Saved!
a. Press
b. Once the character you want is displayed,
c. Press
d. Continue repeating step c until you have
e. Enter up to 16 characters that you desire
f. After you have entered the text you desire,
Figure 49
TURNING THE FLASH ON OR OFF
Cuddeback allows you to turn off the built in flash.
You can select Auto or Off. When Auto is selected
Cuddeback will use the flash if needed. This is the
recommended setting. When Off is selected
Cuddeback will NOT use the flash, therefore images
that require the flash will NOT be taken. Daylight
images will always be taken.
numerous times. The "(" will
change and continue to change as
pressed. Keep pressing
available characters.
press
to advance to the second posi-
tion. A 0 will be displayed.
to change the second character.
Continue to press
you desire is displayed. Then press
advance to the next position.
completed entering the text you desire.
using this method.
press
. [Saved!] will be displayed and the
text you entered will be saved in Cuddeback's
memory
(figure
49).
30
is
to see all the
until the character
to
Need help?
Do you have a question about the NoFlash and is the answer not in the manual?
Questions and answers