Entering The Phone Number - Cuddeback NoFlash Owner's Manual

ENTERING THE PHONE NUMBER

You can program your phone number into
Cuddeback. In the event that your Cuddeback is
stolen and returned to the factory, we will be able to
retrieve this phone number and call you.
Step 1 - Enter the owner password to enable
changing the phone number
1) If you have just programmed the Owner Name,
the Phone Number will be displayed. If not, per-
form steps 2 and 3.
2) Press numerous times until [Theft Stop? C =
Yes] appears on the LCD.
3) Press . The display will prompt [Owner PW
Change?].
4) Press numerous times until [715-762-2260
Change?] is displayed
number is the phone number of the Cuddeback
factory.
5) Press . The display will prompt [Owner PW
<0 >].
6) Enter the owner password using the method pre-
viously described. After all 5 numbers are entered
press .
Step 2 - Enter the numbers and characters you
want for the phone number.
7) The display will change to [(
LEARN - When setting the phone number (DOWN) changes
the number and (UP) advances to the next position.
(figure 47). This default
] (figure 48).
29
(715)762
Change?
(
Figure 47
Figure 48