Taking Videos - Cuddeback NoFlash Owner's Manual

Digital scouting camera
Table of Contents

Advertisement

ADV Mode
Change?
EZ Mode
TIP - When videos are enabled
Cuddeback will still take a still image.
TIP - Videos are a great way to see
what happens after the image is
taken and allows you to see if
another animal is with the animal
that triggered the camera.
Video Mode
On
To re-enable E-Z Mode
1) Remove the batteries from Cuddeback.
2) Install the batteries. Slide On/off switch to ON.
3) When the display prompts [ADV Mode Change?]
immediately press
Figure 33
4) The display will prompt [E-Z Mode]
The next sections describe how to use the additional
features that are available in Advanced Mode.
Advanced Mode must be enabled to view and set
these features.
Figure 34

TAKING VIDEOS

Cuddeback can be programmed to take videos when
an animal is detected.
Turning on the Video
1) Press
C = Yes] is displayed.
2) Press
3) Press
displayed
4) Press
5) Off - Video clips will not be recorded.
6) On - Video clips will be recorded during day and
night. When video is ON still images will still be
Figure 35
recorded.
numerous times until [Camera Setup?
.
numerous times until [Video Mode] is
(figure
35).
or
to change the setting.
20
(figure
33).
(figure
34).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NoFlash and is the answer not in the manual?

Questions and answers

Table of Contents