Cuddeback NoFlash Owner's Manual page 28

A
TIP - You can program a space
between your first and last name.
Press (DOWN) until no character is
displayed. Then press (UP) to
advance to the next position.
You don't have to enter characters
in all 16 positions. At any time you
can finish by pressing (C).
You can cancel entering the Owner
Name at any point before Saved! is
displayed by pressing (S).
You can erase the Owner Name by
programming all spaces. To do this
program the Owner Name, change
the first position to a blank, all the
other positions will be blank already,
then press (C).
Saved!
Step 2 - Enter the characters you want for the
owner name
7) The display will change to [A
LEARN - When entering the owner name (DOWN) changes
the letter and (UP) advances to the next position.
Figure 45
a. Press
b. Press
c. Once the character you want is displayed,
d. Press
e. Continue repeating step D until you have
f. Enter up to 16 characters that you desire using
g. After you have entered the text you desire,
Figure 46
. The A will change to a B.
numerous times. The B will contin-
ue to increment. Keep pressing
the available characters.
press to advance to the second position.
to change the second character.
Continue to press
desire is displayed. Then press
advance to the next position.
completed entering the text you desire.
this method.
press . [Saved!] will be displayed and the
text you entered will be saved in Cuddeback's
memory (figure 46).
28
] (figure 45).
to see all
until the character you
to