Clock Display Mode; Nd Time Zone Mode; Alarm Mode; Setting The Alarm - Oregon Scientific SmartHeart SE190 User Manual

6. Press MODE to exit the setting mode at any time.
NOTE The clock is programmed with a 50-year
auto-calendar, which means you do not need to reset
the days of the week and dates each month.

CLOCK DISPLAY MODE

You can change the 2
nd
Clock Display Mode.
2 nd TIME ZONE MODE
The second time zone mode is useful for keeping track of
the time in another time zone. The time zone is set using
the same procedure as the real-time clock.
Press MODE to enter the 2nd time zone.
SE190_M_EN_R3
time zone when you are in the
MODE
MODE
8

ALARM MODE

SETTING THE ALARM

To set the alarm:
1. Press MODE to switch to Alarm
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press ST / SP / + to change the setting. Hold to
speed through the options. Press SET to confirm the
setting and move on to the next one.
4. Repeat step 3 to change other settings for this
mode.
5. The setting sequence is hour and minute.

ACTIVATING / DEACTIVATING THE ALARM

1. Press MODE to navigate to Alarm Mode.
2. Press SET to activate or deactivate the alarm.
appears when the alarm is activated and sounds
at the set time every day.

TURNING THE ALARM SOUND OFF

Press any key to turn the alarm sound off for the day.
The alarm clock is still active and will sound again
the following day, until the alarm function has been
deactivated.
8
2006.4.24, 3:23 PM