View Data While Stopwatch Is Running; View Stopwatch Records - Oregon Scientific SmartHeart SE190 User Manual

To set the stopwatch:
1. Press MODE to switch to Stopwatch
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press ST / SP / + to change the setting. Hold to
speed through the options. Press SET to confirm the
setting and move on to the next one.
4. Repeat step 3 to change other settings for this
mode.
5. The setting sequence is target activity, lower and
upper heart rate limit, alert ON / OFF.
6. Press MODE to exit the setting mode at any time.
Press MODE to navigate to Stopwatch Mode. You can
now perform the following functions:
TASK
Start stopwatch
Pause / resume
stopwatch
Stop / clear
stopwatch
NOTE The stopwatch begins measurement in min:
sec:1/100 sec. After 59 minutes pass, the display will
change to hrs:min:sec.
SE190_M_EN_R3
INSTRUCTION
Press ST / SP / +
Press ST / SP / +
Press and hold ST / SP / +
14
NOTE You cannot use the Smart Training Program if
you are running the stopwatch.
NOTE will flash when you exceed your upper or
lower heart rate limit.

VIEW DATA WHILE STOPWATCH IS RUNNING

When the stopwatch is running press
SET to view the calories burned.
NOTE With the exception of the Smart Training
Program, the stopwatch will continue to operate in the
background along with other functions. "STW" will flash
to indicate the stopwatch is still active.

VIEW STOPWATCH RECORDS

When the stopwatch training has been paused or
completed, press MEM to view the following records:
THE LENGTH OF EX- TOTAL EXERCISING
ERCISE TIME WITHIN TIME AND AVERAGE
THE TRAINING ZONE HEART RATE
14
2006.4.24, 3:23 PM
CALORIES BURNED