Operating Modes; Hr / Kcal Mode; Heart Rate Limits - Oregon Scientific SE122 Manual

OPERATING MODES

CHRONO (Stopwatch)
Press MODE to switch between:
• Time mode
• Alarm mode
• Chrono (Stopwatch) mode

HR / KCAL MODE

HEART RATE MEASUREMENT
TIME
ALARM
Press / KCAL to enter HR Measurement mode. Press
MODE to return to previous mode.
NOTE
When no signals are received or the measurement
is out of range for five minutes, the receiver will automatically
return to the previous operating mode.

HEART RATE LIMITS

The heart rate limits help you determine if you are exercising
within your training zone.
• If you go above your limits
• If you go below your limits
To set the heart rate limits:
1. Press / KCAL to navigate to HR Measurement
mode.
2. Press and hold MODE until
3. Press SET to choose the lower limit, then press MODE
to confirm.
4. Press SET to choose the upper limit
MODE to confirm.
NOTE
The upper limit must exceed the lower limit. The
transmitter will adjust the ranges automatically according to
the data entered. You can also activate the heart rate limit
alert function, so the transmitter will emit a beeping sound
when the limits are exceeded.
6
will flash
will flash
appears.
, then press