Table of Contents
Advertisement
Location
ATM Setting
NAT
DNS
DHCP Mode
Traffic Index
IP Address and
Network Mask
DNS
Configurations on MT800
Parameters
Encapsulation
Connection Type Select "RFC2684 Bridged".
Address Type
IP Address and
Subnet Mast
Default Route
Gateway IP
Address
It is recommended to enable the function of NAT.
It is recommended to have DNS Relay function enabled.
And set DNS IP address provided by your ISP.
It is recommended to have DHCP Server function enabled.
It is recommended to set 0.
Configurations on the user's PC
It is recommended to set the mode as obtaining an IP address
automatically.
It is recommended to set the mode as obtaining a DNS server's
IP address automatically.
Comments
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Select "Static IP".
The values shall be provided by your ISP.
Select "Enable".
The value shall be provided by your ISP.
84
Advertisement
Table of Contents
