Table of Contents
Advertisement
gt: any source IP address that is numerically greater
than the specified address.
gteq: any source IP address that is numerically
greater than or equal to the specified address.
eq: any source IP address that is numerically equal to
the specified address.
neq: any source IP address that is not equal to the
specified address.
range: any source IP address that is within the
specified range, inclusive.
out of range: any source IP address that is outside
the specified range.
self: the IP address of the MT800 interface on which
this rule takes effect.
Dest IP Address: IP address criteria for the destination
computer(s) (i.e., the IP address of the computer to which
the packet is being sent). In addition to the options
described for the Src IP Address field, the following option
is available:
bcast: specifies that the rule will be invoked for any
packets sent to the broadcast address for the
receiving interface. When you select this option, you
do not need to specify the address, so the address
fields are dimmed.
Protocol: IP protocol criteria that must be met for rule to be
invoked. You can specify that packets must contain the
selected protocol (eq), that they must not contain the
specified protocol (neq), or that the rule can be invoked
regardless of the protocol (any). TCP, UDP, and ICMP are
commonly used IP protocols; others can be identified by
56
Advertisement
Table of Contents
