Table of Contents
Advertisement
occurring in the previous x minutes. (Logging may be
helpful when troubleshooting.) This information can also be
e-mailed to administrators.
Security Level: The security level that must be enabled
globally for this rule to take affect. A rule will be active only
if its security level is the same as the globally configured
setting (shown on the main IP Filter page). For example, if
the rule is set to Medium and the global firewall level is set
to Medium, then the rule will be active; but if the global
firewall level is set to High or Low, then the rule will be
inactive.
Black List Status: Specifies whether or not a violation of
this rule will result in the offending computer's IP address
being added to the Black List, which blocks the MT800
from forwarding packets from that source for a specified
period of time.
Log Tag: A description of up to 16 characters to be
recorded in the log in the event that a packet violates this
rule. Be sure to set the Log Option to Enable if you
configure a Log Tag.
Start/End Time: The time range during which this rule is to
be in effect, specified in military units.
Src IP Address: IP address criteria for the source
computer(s) from which the packet originates. In the
drop-down list, you can configure the rule to be invoked on
packets containing:
any: any source IP address.
lt: any source IP address that is numerically less than
the specified address.
lteq: any source IP address that is numerically less
than or equal to the specified address.
55
Advertisement
Table of Contents
