Table of Contents
Advertisement
DV3251-En.book Page 33 Monday, December 12, 2005 4:07 PM
Performing manual installation
The Manual Installation feature allows you to change the program locations that are stored in
the TV Program memory of the display.
This option is not possible when the Child lock is activated. See
1. From the TV Menu, press the
the OK button. The Manual Installation menu will display:
2. If the Country menu item is set to "Other", you should press the
TV standard according to your region. See
3. Press the
input the TV program you want to set up.
4. Press the
tuning system. If the tuned program is incorrect, press the or
desired program is located. You can directly input the frequency using the program selection
buttons if you wish.
5. Press the
reception of TV signal (only necessary where the image or sound reception is poor).
6. If the SCART signal input is connected, press the
press the
• On: Select this option if an external decoder Set-Top-Box (STB) is being used.
• Off: Select this option if no external decoder STB is being used.
7. Press the
format for the Teletext function.
8. Press the
program to the TV Program memory.
9. Press the MENU button again to close the menus.
or
buttons to select Manual Installation and then press
button to highlight Selected PR and then press the program selection buttons to
button to highlight Frequency and then press the
button to highlight Fine Tune and then press the
or
buttons to select from the following options:
button to highlight Text Code and then press the
button to highlight Store on Prog. and then press the OK button to save this
"Child lock" on page
or
"TV menu" on page
32.
or
buttons to start the
button again until your
or
buttons to adjust the
button to highlight Decode and then
or
buttons to select a code
On-Screen Display (OSD) menu
35.
buttons to select a
33
Advertisement
Table of Contents
