Advertisement
Table of Contents
BenQ V32S LCD Display
TV Tuner Installation Guide
Package contents
Check the contents in the package. If any item is missing or damaged,
contact your place of purchase immediately.
• TV tuner x1
• Installation guide x1
• Screw x1
Installing the TV tuner
1. Turn off the LCD display. Disconnect the display from the power
outlet and remove all connected audio and video signal cables.
2. Use a suitable
screwdriver to remove
the rear panel screw, and
take the panel away
from the display.
3. Remove the round
plastic plate from the
rear panel.
4. Insert the TV tuner all
the way into the TV
tuner slot. Note the
direction of the TV
tuner when inserting.
5. Use the screw that
comes with the TV
tuner package to secure
the TV tuner onto the
display.
Advertisement
Table of Contents
Related Manuals for BenQ V32S
Summary of Contents for BenQ V32S
-
Page 1: Package Contents
BenQ V32S LCD Display TV Tuner Installation Guide 3. Remove the round plastic plate from the Package contents rear panel. Check the contents in the package. If any item is missing or damaged, contact your place of purchase immediately. • TV tuner x1 •... - Page 2 Connecting the TV antenna cable 1. Connect the TV antenna. 6. Install the rear panel back on the display and tighten the rear panel screw. Connect the TV antenna cable to the TV antenna terminal on the TV tuner 2. Reconnect all audio, video signal and power cables and turn on the display.
Need help?
Do you have a question about the V32S and is the answer not in the manual?
Questions and answers