Table of Contents
Advertisement
DV3251-En.book Page 18 Monday, December 12, 2005 4:07 PM
Using the remote control
Power on, power off and standby
Turning on the display
After plugging the display's power cord into a wall outlet, the display will enter standby mode
automatically. The power indicator will light up red.
Press the
(Power) button on the top of the display, or press the Power button on the remote
control as highlighted. The display will turn on and the power indicator will change to green.
Turning off the display
Press the
(Power) button on the top of the display, or the Power button on the remote
control again, and the display will return to standby mode. The power indicator will turn red.
Switching inputs
Turn on all connected equipment or devices before selecting an input.
Press the INPUT button on your display, or press the Input
to display the current selected input.
Press the button repeatedly until your desired input is displayed. The sequence is as follows:
ATV
AV1
AV1-RGB
Component 1
• AV2-S will appear only when S-Video (Y/C) signal is detected from the SCART inputs.
• AV3-S and AV4-S will appear only when the S-Video input signal is connected to these inputs.
• DVI will appear only when DVI digital video signal is connected to the HDMI input.
Adjusting volume
Adjusting the volume
1. Press the Volume
remote control to increase volume. The volume indicator will increase in length as volume
rises.
2. Press the Volume
remote control to decrease volume. The volume indicator will decrease in length as volume
falls.
Mute setting
1. Press the Mute
2. Press the Mute
display to restore the sound level.
TV sound mode selection
Press the TV sound
3", "Auto", "Nicam", "Stereo" or "Mono" systems (the items available will depend on the TV
sound system being received).
Changing programs
Using the program selection buttons on the remote control to change programs
• To select a single-digit program, press the corresponding program selection button on the
remote control. For example, to select program 8, press the program selection
the remote control.
• To select a double-digit program, press the Program entry
and then enter the program number using the program selection buttons. For example, to
select program 28, press the Program entry button, and then the
selection buttons on the remote control.
18
Using the remote control
AV2 (or AV2-S)
Component 2
PC
HDMI (or DVI)
button on your display or press the Volume
button on your display, or press the Volume
button on the remote control to turn off the audio temporarily.
button once more, or press the Volume or Volume button on your
button on your remote control to select "Sound 1", "Sound 2", "Sound
button on your remote control
AV3 (or AV3-S)
AV4 (or AV4-S)
ATV ...
+ button on your
- button on your
button on the remote control,
,
button on
program
Advertisement
Table of Contents
