Table of Contents
Advertisement
DV3251-En.book Page 36 Monday, December 12, 2005 4:07 PM
Setup menu
Item
Select your desired language for
Language
the OSD menu.
Freeze the motion on the screen
Freeze
image (however, broadcast
continues).
Adjust backlight intensity.
If "Auto" is selected, the ambient
light sensor will be activated and
Backlight
the display's backlight will be
changed automatically according
to the ambient lighting condition.
Set the Sleep timer to
Sleep Timer
automatically turn off the display.
The Display Power Management
System (DPMS) protects the
DPMS
screen and enters power saver
mode when no PC signal is
detected.
Select input signal type via DVI
input if a PC or Video output
device is connected to the display.
Remember to adjust the timing
settings of the output device
DVI Input
according to
(Component/DVI) Input Signal
Timing"
Sub/DVI) Input Signal Timing" on
page
40.
Restore all settings to their default
Reset All
values.
Settings
36
On-Screen Display (OSD) menu
1. Press the MENU button to display the menu.
2. Press the
3. Press the
4. In the Setup menu, use the
5. To return to the menu one level up, press the
Function
"Supported Video
or
"Supported PC (D-
The TV program settings will
not be reset.
or
buttons to select Setup and
then press OK to enter the submenu.
or
buttons to select an item.
adjust the setting or select the options.
MENU button again.
Operation
Use the
and
buttons on
the remote control or the
Volume
and Volume
buttons on the display to
change the selection.
Press the OK button on the remote control or the
Input button on the display to activate the reset.
or
buttons to
Range
• English
• Français
• Nederlands
• Deutsch
• Italiano
• Español
• Off
• On
• Auto
• Dark
• Normal
• Bright
0, 30, 60, 90, 120,
150, 180 minutes
• Off
• On
• PC
• Video
Advertisement
Table of Contents
