Setting-Up The Display Device; Connecting Audio And Video Inputs; Connecting The Scart Inputs; Connecting The Scart Outputs - BenQ V32S User Manual

DV3251-En.book Page 21 Monday, December 12, 2005 4:07 PM

Setting-up the display device

Connecting audio and video inputs

Pay attention to the following when making connections:
• For safety reasons, before connecting any external devices, please turn the devices off.
• Also, before deciding upon a particular connection method, please familiarise yourself with
the location and type of each input.
• Be aware that if incorrect connections are made, picture or colour quality may be adversely
affected.
• Once connected, please ensure that all plugs and connectors are firmly seated.

Connecting the SCART inputs

Connect the AV1 or AV2 (SCART) terminal on
the display to the SCART terminal on the AV
equipment using a SCART cable (not provided).

Connecting the SCART outputs

Connect the AV1 or AV2 (SCART) terminal on the
display to the SCART terminal on the AV equipment
using a SCART cable (not provided).
Depending on the input source connected and selected
by using the Input button on the remote control, the
AV1 and AV2 SCART terminals can be set to output
different types of signals as shown in the table below:
Selected input
ATV
AV1 (Composite
Video)
AV1 RGB
AV2 (Composite/S-
Video)
AV3/AV4 (Composite/
S-Video)
Component 1/2
PC
HDMI (DVI)
Corresponding AV1 Corresponding AV2
SCART output SCART output
ATV ATV
AV1 (Composite
ATV
Video)
ATV ATV
ATV ATV
AV3/AV4 (S-Video
ATV recombined as
Composite Video)
ATV ATV
ATV ATV
ATV ATV
SCART cable
DVD player
SCART cable
DVD recorder
or VCR
Setting-up the display device 21