Table of Contents
Advertisement
DV3251-En.book Page 30 Monday, December 12, 2005 4:07 PM
Feature menu
Item
Enhances the contrast among details
Black Extension
when viewing dark images.
Adjusts the auto contrast
enhancement function that
optimizes the image contrast ratio
ACE
for interlaced inputs only.
(Auto Contrast
Enhancement)
Adjusts the image noise reduction
function that helps to remove noise
in TV images. Suitable in fringe and
Noise Reduction
poor TV reception areas.
Adjust image aspect ratio.
Aspect Ratio
Set the display to automatically
adjust screen aspect ratio when the
SCART input is used, or when a WSS
Auto Format
(Wide Screen Signaling) signal is
detected from Composite Video
inputs (ATV, AV1, AV2, AV3 or
AV4).
30
On-Screen Display (OSD) menu
1. Press the MENU button to display the menu.
2. Press the
then press OK to enter the submenu.
3. Press the
4. In the Feature menu, use the
adjust the setting or select the options.
5. To return to the menu one level up, press the
MENU button again.
Function
This option will not appear
when PC, DVI (via the HDMI
input), HDMI or HD Component
Video (720p or 1080i) is the
signal source.
This option will not appear
when PC or DVI (via the HDMI
input) is the signal source.
The Real, Letter Box and Wide
options are unavailable when
PC or DVI (via the HDMI input)
is the signal source.
or
buttons to select Feature and
or
buttons to select an item.
or
Operation
• Low
• Middle
• High
• Off
• Low
• Middle
• High
• Off
Use the
and
buttons
• Low
on the remote control or
• Middle
the Volume and Volume
• High
buttons on the display
to change the selection.
• Off
Refer to
ratio behaviour"
on page
• On
• Off
buttons to
Range
"Aspect
41.
Advertisement
Table of Contents
