Table of Contents
Advertisement
Performing Manual Installation
The Manual Installation option allows you to manually adjust channel settings.
1. In the TV Menu, press the
OK button. The following Manual Installation menu will appear.
2. Press the
or
buttons to select a TV standard according to your local TV system.
3. Press the
button to highlight Select CH and then press the
channel you want to set up.
4. Press the
button to highlight Frequency and then press the
ing system. If the tuned channel is incorrect, press the or
channel is located.
5. Press the
button to highlight Fine Tune and then press the
reception of TV signal.
6. (Optional) If the SCART signal input is connected, press the
and then press the
• On: Select this option if you are using a decoder supplied from your TV system.
• Off: Select this option if no external decoder is used.
7. Press the
button to highlight Text Code and then press the
format for the Teletext function.
8. Press the
button to highlight Store This Channel and then press the OK button to save cur-
rent channel settings to the memory.
9. Press the MENU button again to close the menus.
Editing Channels
You can delete unwanted channels, add a channel name and sort the received channels onto
their correct channel numbers.
Naming a Channel
1. In the TV Menu, press the
ton. The following Channel Edit menu will appear.
2. Press the
button, and then the
or
buttons to select Manual Installation. and then press the
or
buttons to select from the following options:
or
buttons to select Channel Edit and then press the OK but-
or
buttons to select the channel you wish to name.
or
buttons to select a TV
or
buttons to start the tun-
button again until your desired
or
buttons to adjust the
button to highlight Decode
or
buttons to select a code
On-Screen Display (OSD) Menu
33
Advertisement
Table of Contents
