Table of Contents
Advertisement
DV3251-En.book Page 16 Monday, December 12, 2005 4:07 PM
Getting to know the remote control
16
Getting to know the remote control
1.
Power
Press this button to power the display on and off. See
on, power off and standby" on page
2.
Input
Press this button to select a different input source. See
"Switching inputs" on page
18.
3.
Backlight
Press this button to select your desired screen backlight level.
See
"Adjusting backlight" on page
4.
Information
Press this button to display the screen image source
information. See
"Display information" on page
5.
Sleep
• Press this button to set the automatic shut-off timer. See
"Using the sleep timer" on page
• When Teletext is displayed on the screen, press this button to
select the corresponding colour Teletext page. See
Teletext function" on page
6.
TV sound
• Press this button to toggle between stereo, mono and
bilingual sound reception. During bilingual broadcasts,
Sound 1 /Sound 2, or sound 1 /sound 2 / Sound 3 (depending
on the received broadcasting signal) can be selected. See
sound mode selection" on page
• When Teletext is displayed on the screen, press this button to
select the corresponding colour Teletext page. See
Teletext function" on page
7.
Preset
• Press this button to select from among 4 preset picture
modes. See
"Selecting a picture mode" on page
• When Teletext is displayed on the screen, press this button to
select the corresponding colour Teletext page. See
Teletext function" on page
8.
Audio
• Press this button to select the AV source audio mode.
(This is for all audio except TV Sound modes.)
• When Teletext is displayed on the screen, press this button to
select the corresponding colour Teletext page. See
Teletext function" on page
9.
Mode
Press this button to cycle the Teletext display mode between
Teletext only or with Teletext superimposed on the display. See
"Using the Teletext function" on page
10.
Index
Press this button to go to the Teletext index page. See
Teletext function" on page
20.
11.
Reveal
Press this button to display any concealed Teletext information.
See
"Using the Teletext function" on page
"Power
18.
20.
20.
20.
"Using the
20.
18.
"Using the
20.
19.
"Using the
20.
"Using the
20.
20.
"Using the
20.
"TV
Advertisement
Table of Contents
