Setting Up The Display; Mounting The Display - BenQ CP6501K User Manual

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
• The portrait function is for CP6501K only. To use the portrait function, the display
should be used with TTY21 trolley or TMY21 wall mount which should be purchased
separately. Read
Installing the display on a wall
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
CP6501K
5. Install the wall mounting bracket on
the display and attach the display to
the wall according to the mounting
bracket's instructions. The length of
the screw should exceed the
thickness of the wall mounting
bracket by at least 25 mm. Make sure
that all screws are tightened and
secured properly. (Recommended
torque: 470 - 635N•cm). The
mounting means should be strong
enough to bear the weight of the
display.
Portrait function on page 13
*Screw type: M8*25L
Setting up the display
for more information.
CP8601K
LCD display
25 mm
(0.39")
*Screw type: M8*25L
Thickness of
the wall
mounting
bracket
11