Getting To Know The Remote Control - BenQ SH Series Installation And Operation Manual

Getting to know the remote control

1. Power/standby
Press this button to power the display on or put it to
standby mode. See "Power on, off and standby" on
page 8.
2. 訊號來源 (Input)
Press this button to select a different input source. See
"Switching inputs" on page
3. 電視 / 數位電視 (TV/DTV)
Press this button to switch directly to the (traditional)
analog TV mode to view TV or CATV channels, or to
the digital TV mode and view digital TV channels (A
separate DTV tuner is required to use this function).
See "Viewing traditional (analog) or digital TV" on
page 9.
4. 定時關機 (Sleep Timer)
Press this button to set the automatic shut-off timer.
See "Using the sleep timer" on page
5. 畫面靜止 (Freeze)
Press this button to freeze the image on the screen.
Press the button again to resume viewing in real time.
See "Using the freeze function" on page
6. 畫面比例 (Aspect)
Press this button to adjust the screen image aspect
ratio. See "Adjusting aspect ratio" on page
7. 背光亮度 (Backlight)
Press this button to select your desired screen
backlight level. See "Adjusting backlight" on page
8.
Senseye
Press this button to display the Senseye menu. See
"Senseye menu (SH series)" on page 23
menu (VB series)" on page
9. 影像模式 (Picture Mode)
Press this button to select a desired preset picture
mode. See "Selecting a picture mode" on page
10. 子母畫面 (Picture In Picture)(SH/VH
series)
Press this button to simultaneously view signals from
two different sources on-screen. See
(Picture-In-Picture) function (SH/VH series)" on
page 11.
11. 雙語 (MTS)
Press this button to toggle between available sound
reception modes. See
page 9.
Getting to know the remote control
8.
13.
13.
and
24.
"Using the PIP
"MTS (TV Sound selection)" on
12.
13.
"Senseye
10.
5