Table of Contents
Advertisement
Section 2: Setting Up and Configuring the
JS100 network media Storage Unit
GETTING STARTED
1
Select an appropriate network cable, connect one end of the cable to the RJ-45 connector on the
JS100 network media storage unit, and connect the other end of the cable to an RJ-45 network port
on the network.
2
Turn on the power to the JS100 network media storage unit.
3
On any Windows® machine on the same network, open Network Neighborhood.
4
Type 192.168.1.1 in the address box, and then press ENTER.
5
Double-click the Config folder.
6
Double-click the Configuration.html file.
7
Click the Please click here to begin your JS100 configuration link on the Welcome page.
WELCOME PAGE PIC
Page
4
©2005 Quasarbiz
Document: VS100UM101
Advertisement
Table of Contents
