REAR PANEL
The primary power switch, the AC connector, two USB ports, an RJ-45 network port, a reset
button, and a serial development connector are on the rear panel of the JS100 network
media storage unit.
Rear Panel of the JS100
RJ-45 Network Port
The RJ-45 network port is a standard network (Ethernet) port. The network port is used to
connect the JS100 network media storage unit to the network using a Category 5 network
cable. The network cable is not included.
USB Ports
The USB ports can be used to connect to USB drives, which is a flexible way to quickly or
temporarily add disks (such as temporarily tore data while updating one of the internal IDE
disk drives)
Connecting a USB printer to one of the USB ports enables the JS100 network media storage
unit to act as a print server. The JS100 network media storage unit accepts print requests
from PCs on the network and saves the files to be printed on the JS100 disks until the printer
has completed the process.
USB cables are not included.
AC Connector
The AC connector is an industry-standard 120V connector. The supplied power cord or a
compatible cord can be used to connect to a wall outlet or to an uninterruptible power supply
(UPS).
Page
©2005 Quasarbiz
Document: VS100UM101
3