Configuring Your Js100 - Quasarbiz JS100 User Manual

CONFIGURING YOUR JS100

The initial setup is now complete. To begin configuring your JS100 unit, click Continue.
SETUP COMPLETE PAGE PIC
The configuration user interface has six main pages for configuring the JS100 unit:
Notes: To view the pages associated with each main page, move your cursor over page names
across the top of the user interface. To go to a particular page, click the page name.
If you are satisfied with the configuration settings you have made on each configuration page, click
Apply before going to another configuration page. If not, click Cancel.
Administration. Administration pages include the following (see
Administration - Basic
Firmware Administration
Error/Alerts Logging
Windows Setup
User Management - Basic
Share Management. Share Management pages include the following (see
Management"
Share Management - Basic
Create New Share
Share Access
Disk Management. Disk Management pages include the following (see
for details):
Disk Management – Basic
Legacy Disk Management – Basic
Create New Disk Pool
Resize Disk Pool
Add Mirrors/Spares
Remove Mirrors/Spares
Default Disk Behavior
Disk Power Management
Networking. (see
Network Settings").
Printers. (see
Site Map. The Site Map page provides links to all the JS100 configuration pages (see
"Navigating to Other Site
Page
12
for details):
"Viewing and Modifying Network Settings"
"Selecting a Printer")
Pages").
©2005 Quasarbiz
Administration for details):
"Share
"Disk Management"
and "Viewing and Modifying
Document: VS100UM101