Table of Contents
Advertisement
The JS100 router unit cannot be setup as a DHCP client because as a router, it should have a
gateway IP address other than its own IP address; if JS100 unit is unable to obtain an IP address
from a different DHCP server, then no client would be able to use the router. Therefore, it is
advisable to set the JS100 router as the only DHCP server on the network.
LAN IP Address. Sets the IP address of the LAN interface.
LAN Subnet Mask. Sets the subnet mask of the LAN interface.
LAN Default Gateway. Sets the IP address of the default gateway to use on the LAN.
LAN Domain Name. Sets the domain name to be provided to the LAN client requesting an IP
address through DHCP.
LAN DNS Servers. Sets the IP addresses of the DNS servers to use for resolving host names.
LAN WINS Servers. Sets the IP addresses of the WINS server to use for resolving NetBIOS
names.
Page
11
©2005 Quasarbiz
Document: VS100UM101
Advertisement
Table of Contents
