Table of Contents
Advertisement
MAKING NOTIFICATION SETTINGS
On the Error Handling Alerts page, you can specify how you want to be notified in the event of an
operational problem or error. The two options are:
e-mail notification, or
pop-up window.
Note: If you do not want to make notification settings now, you can do so later.
To specify being notified by e-mail
1
Select the E-mail Notification Enabled check box.
2
In the Error Handling SMTP Server box, type the host name of the SMTP server to be used.
Notes:
For the host name, use the name listed in your e-mail account.
The default SMTP port number is 25; to override this setting, select the SMTP Port Override
check box and type the new SMTP port number in the Error Handling SMTP Port Number
box.
If you want others to receive the e-mail notice, type the e-mail address of each recipient in
the individual Error Handling E-mail Recipients boxes.
Click Send Test E-mail to verify that the settings for e-mail notification are correct.
To specify being notified by pop-up windows
1
Select the Pop-Up Notification Enabled check box.
2
In the Error Handling Pop-Up Machines box, type the name(s) of the computer(s) on which the
pop-up windows are be displayed.
Note: Type the computer name shown on the Computer Name tab of System Properties for
each computer.
3
Click Send Test Pop-up to verify that the settings for enabling pop-up notification are correct.
Note: Computers designated to receive pop-up notification must have Messenger service
enabled and started.
Click Next.
NOTIFICATION SETTINGS PAGE PIC
Page
9
©2005 Quasarbiz
Document: VS100UM101
Advertisement
Table of Contents
