Assigning A Name To The Js100; Making Security Settings - Quasarbiz JS100 User Manual

ASSIGNING A NAME TO THE JS100 NETWORK MEDIA STORAGE UNIT
The first step in the Initial Setup process is to set the Machine Name for the JS100 network media
storage unit. Any name can be used for the machine name. When there are multiple JS100 network
media storage units on the network, each unit must have a unique name. Type the machine name
the Machine Name box, and then click Next.
MACHINE NAME SETUP PAGE PIC

MAKING SECURITY SETTINGS

On the Administration Security Setup page, you can set up your JS100 unit to have the following
types of security:
No security
Password-based security
Physical security
Both password-based security and physical security
Password-based security consists of an administration user name and an administration password.
If you set password-based security, each time you access the JS100 unit, you must type the user
name and password. The default user name is left blank, and the default password is nasoc.
Physical security consists of setting a requirement that the security button on the front of the unit
has to be pressed each time someone wants to access any of the disk drives in the unit. This
requirement prevents purely network-based attacks. After the security button is pressed, the user
has two minutes to connect to the JS100 unit. After the connection is made, the browser interface is
bound to the machine that is connected to it and all other access requests are denied. To release the
connected machine and to allow another machine to connect, the button must be pressed again. If
the JS100 unit is rebooted, the security button must be pressed to allow users to connect.
Page
7
©2005 Quasarbiz Document: VS100UM101