Table of Contents
Advertisement
Create New Share
The Create New Share page allows you to create a new share in an existing pool.
In Workgroup Member mode with PBSA, the Enable Share Authentication security feature should
be enabled. When enabled, this feature provides share-level security through password protection
of Windows shares.
In Workgroup Member mode with UBSA, users are listed under share permissions. This feature
provides control access to the newly-created share on a user-by-user basis. If more-advanced
security features are required, configure the JS100 unit as a domain controller (See
Domain Controller
To create a new share in Workgroup Member mode with PBSA
1
Type the name of the new share in the New Share Name box.
2
In the Create in Pool list, click the pool where the new share is to be located.
3
Select the Enable Share Authentication check box to password protect the share. Otherwise,
the share can be accessed by anyone that is able to connect to the unit.
4
Type the password in the Share Password box and again in the Confirm Password box.
5
Click Create Share.
CREATE NEW SHARE PAGE PIC
To create a new share in Workgroup Member mode with UBSA
1
Type the name of the new share in the New Share Name box.
2
In the Create in Pool list, click the pool where the new share is to be located.
3
Opposite Shares Permissions, click the permission type to be granted to each user.
4
Click Create Share.
Page
25
Mode").
©2005 Quasarbiz
"Primary
Document: VS100UM101
Advertisement
Table of Contents
