Table of Contents
Advertisement
Share Access
The Share Access page allows an administrator to view and modify share access. This page is
available only if the JS100 unit has been configured as a member of a workgroup. It is not available
if the JS100 unit has been configured as a member of a domain or as a domain controller (see
"Primary Domain Controller
If PBSA has been set for the workgroup, the content of the Share Access page is different than if
UBSA has been set for the workgroup.
To change the share access settings of an existing share for a workgroup with PBSA
1
In the Share Name list, click the name of the share.
2
Click the Enable Share Authentication check box to change the setting. Selecting the check box
enables password-protected access; clearing the check box disables password-protected access,
allowing open access.
3
Click Apply.
To change the password of a password-protected share
1
Type the new password in the New Password box and again in the Confirm Password box.
2
Click Apply.
SHARE ACCESS PAGE PIC
To change share access settings of an existing share for a workgroup with UBSA
1
In the Share Name list, click the name of the share.
2
In the Share Permissions list, click the permission type to be granted to each user.
Page
26
Mode").
©2005 Quasarbiz
Document: VS100UM101
Advertisement
Table of Contents
